< Return

Questions?
Call 855-255-OMER (6637)

FN21

Equivalent to: ATRO FN

Gauge: 13

Product description

T – Nails come in various shank diameters and head-widths. But problems can arise when too THIN and SMALL a “T” Nail is put in a nailer designed for heavier duty applications – or at the other end of the spectrum…. trying to shoot a BIGGER T nail than a tool was made to accept - will either result in constant JAMS or just the nails are TOO Fat to Fit.
Omer helps us find the “T” Nail sweet-spot. Keying in on a very useful 13 gauge (.086” shank diameter) T Nail with a head that is .275” wide…. gives the needed holding power and a head with enough WINGS to suit all but the most demanding applications.
Starting with the little Wine Barrel/Cooperage – Beton model TN.715 nailer that is limited to a maximum 5/8” length. Then move up to Omer's TN.732 tools can accept 13 gauge “T” Nails up to 1 ¼” maximum length. Next for more Power and Size go to the TN.64… with a 2 ½” length nail at the top of its, 3d – 8d (1 ¼” – 2 ½” range). At long last… we have truly Modern – reliable – “T” Nailers made with the Italian tradition of excellence in design and craftsman-like manufacturing skills.

Item Length (mm) Length (inch) Finish Gauge Wire dimension (mm) Point Box Count
FN 21 / 25 25 1" galvanized 13 Chisel 20000
FN 21 / 32 32 1-1/4" galvanized 13 Chisel 10000
FN 21 / 38 38 1-1/2" galvanized 13 Chisel 10000
FN 21 / 45 45 1-3/4" galvanized 13 Chisel 10000
FN 21 / 50 50 2" galvanized 13 Chisel 10000
FN 21 / 55 55 2-3/16" galvanized 13 Chisel 10000
FN 21 / 60 60 2-3/8" galvanized 13 Chisel 10000
FN 21 / 63 63 2-1/2" galvanized 13 Chisel 10000
Related tools
Questions?
Call 0438 455318